Higgs 3 Epc Len; Auto Write Pc; Tag Position - Printronix T6000 Reference Manual

Higgs 3 EPC Len

Higgs 3 tags differ from other RFID tags in that its memory bank size is not
fixed. To accommodate EPC lengths longer than 96 bits, Higgs 3 borrows
memory from the USR bank.
Minimum
Maximum
Factory Default
IMPORTANT

Auto Write PC

This option controls whether the printer automatically writes the RFID tag PC
field to encode information about the length of the EPC field or whether the
application is required to specify.
Disable
Enable
Factory Default

Tag Position

This menu determines how far the RFID tag position of the currently installed
tag differs from the RFID tag position of the standard Printronix tag. Printro-
nix printers print at a maximum speed with RFID labels that have RFID tags
in the standard position.
Minimum
Maximum
Factory Default
IMPORTANT
RFID > Control > Higgs 3 EPC Len
96
496
96
When the EPC length is selected, the USR length
sets automatically per Table 4.
Since the PC value indicates the length of the EPC
in the Higgs 3, the PC value must be programmed
when programming the EPC (if the EPC value has
changed from its factory state). The PC value to be
programmed for each of the supported EPC
lengths is shown in Table 4.
RFID > Control > Auto Write PC
The PC is not automatically written unless part of the
application data.
The PC is automatically written regardless of the ap-
plication data.
Enable
RFID > Control > Tag Position
-1.0 inches
5.0 inches
0.0 inches
The units display in inches or millimeters, depend-
ing on SYSTEM > Control > Media Units.
19