Troubleshooting - Printronix T6000 Reference Manual

Displayed Message
RFID TAG ERR:
Read-Only Tag
ODV COMM ERR
See Manual
RFID TAG FAILED
Check Media
RFID UNLOCK CMD:
Not Supported!
RFID ACS FIELD:
Not Supported!
RFID KIL FIELD:
Not Supported!
RFID PC FIELD:
Not Supported!

Troubleshooting

If you are having problems with the RFID system, consult Table 8 for a list of symptoms and possible
solutions.
A write was attempted on a read-only tag.
1. Press PAUSE to clear the message.
2. See "Troubleshooting" on page 59.
Communication error between printer and online data validator
(ODV).
1. Cycle power.
2. If the problem persists, contact your authorized cus-
tomer service representative.
The menu Control > Error Handling is set to Stop, and the
RFID encoder could not read the RFID tag.
1. Press PAUSE to clear the message.
2. See "Troubleshooting" on page 59.
An unlock command was executed on a tag which does not
support locking.
1. Press PAUSE to clear the message.
2. Remove the unlock command from the application.
The ACS field was accessed on a tag which does not support
the ACS field.
1. Press PAUSE to clear the message.
2. Remove references to ACS field from the application.
The KIL field was accessed on a tag which does not support
the KIL field.
1. Press PAUSE to clear the message.
2. Remove references to KIL field from the application.
The PC field was accessed on a tag which does not support
the PC field.
1. Press PAUSE to clear the message.
2. Remove references to PC field from the application.
Table 8 Troubleshooting the RFID System
Solution/Explanation
59