Printronix T6000 Reference Manual page 51

Command
RFID OVERSTRIKE_REPORT
STATISTICS_REPORT
STATISTICS_CLEAR
EPC_LENGTH
Table 6 PTX-SETUP Commands for RFID
Sub-Command Parameter
0 When set to 0 (OFF), an RFID
overstrike occurs then it is not reported
to the host.
1 When set to 1 (ON), an RFID
overstrike occurs then it is reported to
the host.
0 When set to 0 (OFF), RFID statistics
are not reported to the host.
1 When set to 1 (ON) RFID overstrikes
are reported to the host when an alert
is processed.
None When this command is processed the
RFID statistics are cleared.
Specifies the EPC Length for
EPC field length
RFID tag types that have a vari-
able length EPC field (e.g.
higgs-3). EPC field length can be
one of (96, 112, 128, 144,
160, 176, 192, 208, 224, 240,
256)
NOTE: When the EPC length is
When the EPC length is selected with
the command, the PC field must be
programmed with the correct value as
defined by the EPC Global Class-1
Generation-2 UHF RFID Specification.
Description
selected with the com-
mand, the USR field is au-
tomatically set to the cor-
responding size as defined
by the EPC Global Class-1
Generation -2 UHF RFID
Specification.
51