Managing Samples Loaded Into A Project; (Sample Bank); Saving A Project - Roland Groovebox MC-707 Reference Manual

Managing Samples Loaded into a Project

(Sample Bank)

Here's how to manage the samples that are loaded into a project.
1 .
Press the [PROJECT] button .
2 .
Use the cursor [<] [>] buttons
press the [ENTER] button .
The SAMPLE BANK screen appears.
* Even if you delete a clip or track, the samples used by the sound will remain.
* Samples with a check mark are used by sounds in the project.
* Samples without a check mark are not used by any sound.
3 .
Use the cursor [<] button
cursor [ ] [ ] buttons to select a sample .
4 .
Use the cursor [>] button
cursor [ ] [ ] buttons to select a command .
Command Explanation
PREVIEW Auditions the sound.
RENAME Renames the sample.
DELETE Deletes the sample.
IMPORT Imports a sample from the SD card.
5 .
Press the [ENTER] button .
Execute the selected command.
to select "SAMPLE," and then
to select "SAMPLE," and use the
to select "COMMAND," and use the

Saving a Project

Here's how to save the project to the SD card.
1 .
Press the [PROJECT] button .
M EMO
You can also save by holding down the [SHIFT] button and pressing
the [FUNC] button.
2 .
Use the Cursor [<] [>] buttons
press the [ENTER] button .
The PROJECT NAME screen appears.
3 .
Use the cursor buttons to edit the project name .
Operating the Unit
Cursor [<] [>] buttons
[C2] knob
[C3] knob [C4] knob,
[VALUE] knob
Press the [C2] knob
Press the [C3] knob
4 .
Press the [ENTER] button .
A confirmation message appears.
5 .
Use the cursor [<] [>] buttons
the [ENTER] button .
If you decide to cancel, use the cursor [<] [>] buttons to select
"CANCEL,"
and then press the [ENTER] button.
* If there is a project of the same name, it is overwritten.
* Projects with a lock symbol are locked, and cannot be overwritten.
* If there is no project of the same name, the project is saved as a new project.
Project Operations
to select "WRITE," and then
Explanation
Selects the character to edit.
Switches between uppercase, lowercase,
numerals, and symbols.
Change the character.
Inserts a space.
Deletes a character.
to select "OK," and then press
19