Figure 4.104 - Configuration Message; Figure 4.105 - Areas; Figure 4.106 - Configuration Message - Alcatel-Lucent 9500 User Manual

Navigator area
Note: When the 9500 MPR is used in MPR-e configuration with other equipment, the OSPF
interface parameters of the equipment must be the same as those of the related TMN
interface on the 9500 MPR.
The 9500 MPR OSPF parameters are:
•
•
•
•
•
• To remove an OSPF Area
1.
2.
• To modify an OSPF Area
282
Figure 4.104 — Configuration message
Hello Interval: 10 seconds
Router Dead Interval: 40 seconds
Retransmit Interval: 5 seconds
Interface Transit Delay: 1 second
MTU: 1500 bytes
Figure 4.105 — Areas
Configure the Area Type, then click on the Remove button. A configuration
message will appear.
Click on the OK button.
Figure 4.106 — Configuration message
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01