Mpt-Hc/Hc-Hqam/Xp/Xp-Hqam/9558Hc External Modules (Option For Mpr-E); Mpt-Hc V2/Hc-Hqam With Internal Diplexer; Mpt-Hc/Hc-Hqam/Xp/Xp-Hqam/9558Hc With External Diplexer; Table 3.33 - Mpr-A: Mpt-Hc V2/Mpt-Xp/9558Hc Option - Alcatel-Lucent 9500 User Manual

MPR-A parts lists
interface option
Name
SFP 1000Base-SX
3.9.5 — MPT-HC/HC-HQAM/XP/XP-HQAM/9558HC external
modules (option for MPR-e)
Table 3.34 — MPR-A:MPT-HC/HC-HQAM/XP/XP-HQAM/9558HC external modules
Description
RPS MODULE
XPIC-RPS MODULE
3.9.6 — MPT-HC V2/HC-HQAM with internal diplexer
For transceivers with internal diplexer options, see the 9500 MPR Frequency Plan for MPT
Outdoor Transceivers.
3.9.7 — MPT-HC/HC-HQAM/XP/XP-HQAM/9558HC with external
diplexer
The diplexer included in the available external diplexer assemblies refers to ITU–R F.385,
386 and RF special customers channeling with Tx/Rx separation specified in the 9500 MPR
Frequency Plan for MPT Outdoor Transceivers.
Each diplexer is a 3-port passive device with two band–pass filters as shown in
128
Table 3.33 — MPR-A: MPT-HC V2/MPT-XP/9558HC option
Part number
1AB 38376 0001/3CC
50167 AAAA
Part number
3DB20117BAXX
3DB20116BBXX
3DB20116BCXX
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Remarks
Optical SFP module to be installed optionally
in the MPT-HC/HC-HQAM/XP/XP-HQAM/
9558HC to provide the optical Gigabit
Ethernet interface
Remarks
All frequency band for 1+1 configuration. The 1+1
configuration is not available for MPR-e.
All frequency bands. This module is used for the XPIC
configuration.
Figure 3.42.