Navigator area
Disabling the TMN in Band
Modifying the User port configuration
(UNI / NNI)
Modifying the S-TPID in 802.1ad bridge
mode
A tooltip is also displayed when the mouse cursor is placed over the icon.
If one or several parameters are changed, the operator is also warned when he pushes the
Apply button.
Pushing the Cancel button will stop the application of the modifications.
And pushing the Refresh button will retrieve the initial configuration.
248
Table 4.1 — Parameters leading to a restart
Figure 4.72 — Cancel button
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01