Scope; History; Table 2 - Change History - Alcatel-Lucent 9500 User Manual

Scope

This document describes the hardware and software functionalities for the MSS-1c and
MPR-e solutions for the 9500 MPR.
This document is intended for the technicians involved in Planning, in Operation and
Maintenance and in Commissioning.
The 9500 MPR product supports both the ANSI standard, for the North American market,
and the ETSI standard, for other markets. When referring to information that applies only
to ANSI, this document uses the term MPR-A. When referring to information that applies
only to ETSI, this document uses the term MPR-E.
The MSS-1c system is made up of an Indoor section (MSS-1c) and an Outdoor section
(MPT-HC/HC-HQAM/MC/XP/XP-HQAM/9558HC). The 9500 MPR supports both ANSI
and ETSI standards and is the term used when referring to information that is common to
both standards.
The MPR-e system is made up of an MPT-HC/HC-HQAM/MC/XP/XP-HQAM/9558HC
in standalone mode. MPR-e supports both ANSI and ETSI standards and is the term used
when referring to information that is common to both standards.
References to MPT-HC in this document refer to the MPT-HC V2.

History

ISSUE DATE
01 October 2014
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Table 1 — Product and Release
PRODUCT
• MSS-1c
• MPT-HC/MPT-HC-
HQAM/MPT-MC/MPT-
XP/MPT-XP-HQAM/
9558HC
• MPR-e
Table 2 — Change history
DESCRIPTIONS
Initial Release
RELEASE
5.2.0
Scope
35