Figure 4.88 - Port Vlan Provisioning - Alcatel-Lucent 9500 User Manual

Navigator area
4.9.1.4.9.8.2 — B) In 802.1ad (Q in Q) mode
If the port is configured in NNI, no choice is offered to the operator ("Admit tagged frames
only" is automatically selected).
If the port is configured in UNI "Admit all frames" (untagged and C-Tagged frames are
admitted) is automatically selected, then the S-VLAN associated to this UNI port is
displayed and cannot be changed.
• Select the S_VLAN priority in the list (from 0 to 7)
• Select or not the use of inner C-VLAN priority for S-VLAN priority
Note: C-VLANs cannot be modified.
4.9.1.4.9.9 — Storm control and rate limiting
For Broadcast, Multicast and DLF Storm control, to enable this control, select the check
box and enter a value in the authorized range.
268
Figure 4.88 — Port VLAN provisioning
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01