MSS-4/8
This solution is available with MPT-HC/HC-HQAM/XP/XP-HQAM/9558HC with the
following conditions:
•
Repeater(s) inserted between two terminal MSS-4/8
•
DATA exchange between the two MPR-e through an optical link only
•
Synchronization configured in SyncE
•
No XPIC configuration
•
QoS policy aligned on the 4 stations
•
Service: TDM2ETH, Ethernet traffic
3.10.8.7 — XPIC (with MPT-HC/HC-HQAM/XP/XP-HQAM only, for MPR-e)
The MPT-HC/HC-HQAM/XP/XP-HQAM supports Co-channel Dual Polarized (CCDP)
operation using a built-in Cross-polarized Interference Cancellation (XPIC) function. This
function is implemented as follows:
•
for MPT-HC/XP transceivers, by installing the RPS+XPIC external module
•
for MPT-HC-HQAM/XP-HQAM transceivers, which include integrated XPIC and
RPS functions, no hardware modules are required. An RTU software upgrade is
required to enable XPIC functions
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Figure 3.62 — 1+0 Repeater configuration
MPR-e
MPR-e
Data
DC
MPT Power Unit /
MPT Extended Power Unit /
Battery
Functional description
DC
MSS-4/8
23093
151