Figure 4.87 - Port Vlan Provisioning - Alcatel-Lucent 9500 User Manual

4.9.1.4.9.8 — Port VLAN Provisioning
This screen can be filled only if the 802.1Q or 802.1ad bridge modes have been selected in
Bridge configuration screen.
4.9.1.4.9.8.1 — A) In 802.1Q mode
To configure the behavior of each user port you can:
• Select Admit all frames and for untagged frames at ingress:
•
•
• Or select Admit tagged frames only. In this case untagged frames are dropped.
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Select the VLAN Id in the proposed list. This list contains all the VLAN in
which the port is involved.
Select the priority in the list (from 0 to 7)
Figure 4.87 — Port VLAN provisioning
Navigator area
267