Figure 4.84 - Network Synchronization Clock Provisioning - Alcatel-Lucent 9500 User Manual

4.9.1.4.9.6 — Network synchronization clock provisioning
Figure 4.84 — Network synchronization clock provisioning
Note: Only the ports (ETH and PDH) previously defined are available to support the
synchronization.
To configure the network synchronization:
• Synchronization role, select in the list:
•
•
• Restoration criteria, select a criteria in the list. This is used to configure the behavior
of the synchronization system when it has switched to secondary source and when the
primary source becomes available:
•
•
• Primary source, select one of the proposed source
• Secondary source, select one of the proposed source
For more details on the Synchronization, see
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
"Master" - the NE sends the clock through the radio link to another NE
"Slave" - the NE receives the clock from the radio link or another source
Revertive means the NEC comes back to the primary source
Not revertive means the NEC stays locked to the secondary source and will
return to the primary source only when the secondary one will fail
Synchronization for MSS-1c.
Navigator area
263