Functional description
•
Flow Id is provisioned by MCT/NMS (One VLAN is assigned to each bi-directional
circuit emulated E1 or T1 flow)
3.10.11.3 — ETH2ETH
None of the IWFs belongs to 9500 MPR.
None of the parameters listed in the previous section has to be configured (the 9500 MPR
is transparent).
3.10.12 — MSS-1c Ethernet traffic management
The Ethernet traffic is all the traffic entered the MPR network from user Ethernet ports.
By MCT/NMS it is possible to define the way to manage the Ethernet traffic according to
one of the following options:
•
802.1D (MAC Address bridge)
•
802.1Q (Virtual Bridge)
•
802.1ad (QinQ)
3.10.12.1 — Bridge type change
In case of change of the bridge type, a new configuration file must be sent to the NE (or an
old file can be used).
166
Figure 3.71
shows an example using E1 traffic.
Figure 3.71 — E1 Traffic in ETH2ETH (DATA) profile
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01