Mct Tool Bar; Alarm Synthesis; Figure 4.17 - Tool Bar - Alcatel-Lucent 9500 User Manual

The MCT Launcher reports the complete list of MPR-e configured in the 7705 SAR CLI,
reflecting their operative status. In a table format, the radio screen shows all MPR-e
information inherited according to the mw-link object (configured in CLI) they belong to.
Information for MPR-e units that are operative up appears in black in the list. Information
for MPR-e units that are operative down appear in gray.
The first column of the table reports the status of the MCT session for that specific MPR-
e. When a green triangle appears, no MCT sessions have been started by the MCT
Launcher.
Single click on the green triangle or double click on the specific MPR-e line to start an MCT
session. When an MCT session is already opened for an MPR-e, the first column shows a
red square. Single click on the red square or double click on a specific MPR-e line to close
the MCT session.
When MCT Launcher is closed from either the tool bar or title bar button, all MCT sessions
started by the Launcher will close.
Note: The 7705 SAR supports up to six MCT sessions started by a single MCT Launcher
session.
4.4 — MCT tool bar
The MCT tool bar has the following buttons:
• Disconnect from NE: to disconnect from the NE
• Export NE information: to export the NE configuration and current alarms to a text
file. Only the information related to the MPR-e is reported.
4.5 — Alarm synthesis
The CT provides an alarm functionality that informs the operator on the severity of the
different alarms in the NE as well as on the number of current alarms. There are five
different alarm severity levels. In the CT these different levels are associated with colors.
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Figure 4.17 — Tool bar

MCT tool bar

197