Navigator area
To manage the cross-connections, select one of the following buttons:
•
Add new cross-connection
•
Clone cross-connection
•
Modify selected cross-connection
•
Remove cross-connection
To create the TDM2ETH cross-connection:
1.
Click the Add new cross-connection button
2.
Enter the VLAN ID
3.
Enter the MAC address of the destination IWF
4.
Enter the clock source: Differential or Adaptive
5.
Click on the Add button
The created cross-connection will appear in the cross-connection list, as shown in
Figure
An existing cross-connection can be:
•
modified by pressing the Modify cross-connection button
•
deleted by pressing the Remove cross-connection button
276
Figure 4.97 — TDM2ETH cross-connection
4.96.
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
(Figure
4.98)