Figure 4.96 - Cross-Connection Creation - Alcatel-Lucent 9500 User Manual

This menu allows to change the scheduler operation.
Note: The scheduling mode refers only to queue 1 to 5, because for queue 6 to 8 the
scheduling mode is fixed to HQP.
The scheduling mode can be DWRR or HQP.
If DWRR has been selected the DWRR weight can be assigned to a specific egress
queue (queue 1 to queue 5).
Note: Queue 5 is the highest-priority queue; queue 1 is the lowest-priority queue (valid
only for HQP).
Click on the Defaults button to restore the default algorithm.
Note: the HQP mode can be associated with some queues and DWRR mode can be
associated with other queues. DWRR cannot be assigned to higher-priority queues than
those configured for HQP.
4.9.1.4.11 — TDM cross-connections for MPR-e
This menu allows you to create TDM2ETH cross-connections.
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Figure 4.96 — Cross-connection creation
Navigator area
275