Table of Contents
Advertisement
•
In the column VLAN Name: Enter a name
•
In the columns User 1 to 4: Check the box if the port is implied in the VLAN. Both
enabled and disabled ports can be member of a VLAN. Note that radio port is
automatically included.
•
In the columns Untagged User 1 to 4: Check the box if you want the port removes
VLAN tag at egress.
To remove an existing virtual LAN:
•
Select its VLAN Id in the list
•
Push the button Remove VLAN
If the configuration contains more than 20 VLANs, the keys <<, <, > and >> allows to
navigate between the different screens which display up to 20 VLANs each.
4.9.1.4.9.7.2 — B) Configure the Q in Q mode and create S-VLANs
•
Select the NE bridge mode in 802.1ad (Q in Q)
•
Select a QoS mode: 802.1P, Diffserv or None
•
Select a S-TPID in the proposed list or enter a custom one
•
For each port, select the mode UNI or NNI
Note: If all ports are in UNI mode, the S-TPID configuration is not necessary.
Note: Only one S-VLAN is supported when the port is configured in UNI.
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Navigator area
265
Advertisement
Chapters
Table of Contents
