7705 SAR and MPR-e in Single NE: MCT Launcher start
Figure 4.12 — Main view: System overview with MPT-HC V2/MPT-XP with XPIC module
4.3 — 7705 SAR and MPR-e in Single NE: MCT Launcher
start
In 9500 MPR R4.1.0, the MCT Launcher is the application that interfaces with the
7705 SAR to show the microwave configuration of the system. This application is the entry
point for accessing each individual MPR-e connected to a 7705 SAR in Single NE mode.
For any supported radio configuration, each MPR-e is accessed individually and its
configuration is performed separately in a dedicated MCT session.
This chapter describes all the screens of the MCT Launcher. The MCT Launcher must be
connected to the 7705 SAR as explained in the
See
Software local copy
package CD ROM/DVD ROM and connecting the PC to the console port on the 7705 SAR
(any port having an IPv4 interface) in order to access the MPR-e.
Note: The PC must be in the same subnet as the 7705 SAR IP interface (first connection);
see the
194
for information on copying the MCT Launcher from the software
Maintenance and trouble-clearing
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Provisioning
chapter.
chapter for configuration information.