Figure 4.43 - 1+0 Protection Configuration - Alcatel-Lucent 9500 User Manual

Navigator area
4.9.1.4.4.1 — 1+0 configuration
4.9.1.4.4.2 — 1+1 HSB configuration in Single NE mode with 7705 SAR
In 9500 MPR Release 4.1.0, when 1+1 HSB is selected, the screen reports the status of the
EPS, TPS and RPS protection. This screen reports only the current status and configuration:
it cannot be used to make configuration changes. For more detailed information on 1+1
HSB protection and relative operator commands, see the 7705 SAR OS 6.0.R1
documentation.
Caution: There is no automatic synchronization of the configuration of the two MPTs in a
1+1 HSB configuration. The MCT sessions for the main and the spare MPTs are separate:
the operator must verify that the configurations are aligned.
Note: 1+1 HSB is only supported by 9500 MPR Release 4.1.0 when the MPR-e is in Single
NE mode with 7705 SAR; see
information.
220
Figure 4.43 — 1+0 Protection configuration
7705 SAR platform prerequisites
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
for more detailed