Chain Adjustment; Reverse Comp. - Carter Talon 150 FX Series Service Manual

CHAIN ADJUSTMENT

After the first two hours of operation, check the chain adjustment, and readjust if is has more than
1/2" flex.
1. Loosen Nut 1
2. Adjust Nut 2 (Turn nut clockwise in 1/2 turn increments, then turn nut#1 clockwise until nut is
tight. Follow this procedure until chain is at proper tension.)

REVERSE COMP.

• Check internal parts of Reverse Comp. periodically for parts wear, replace them if wear is pres-
ent. Clean if dirty and re-grease using a liberal amount.
71