Regulate Rectifier Inspection; Resistor; Resistor Resistance Value Measurement; Connecting Type - Carter Talon 150 FX Series Service Manual

Connecting type

Battery (the red wire) – Vehicle body
Connecting wire (the green wire) – Vehicle body
Lighting wire (the yellow wire) – Vehicle body (re-
move the resistor, side auto starter plug, and turn the
lighting switch to OFF)
Charging wire (the white wire)- Vehicle body
W (White)
Y (Yellow)
R (Red)
G (Green)

REGULATE RECTIFIER INSPECTION

When the main wiring – sub electric circuit condition is normal,
inspect the regulate rectifier.
• Check that the regulate rectifier plug contacts well.
• Measure the resistance value between every regulate rectifier terminal.
• If the resistance value between the terminals is unusual, replace the regulate rectifier.

RESISTOR

RESISTOR RESISTANCE VALUE MEASUREMENT

Measure the resistance value between the resistor wire and the vehicle body. It is normal when
the actual value is in the range of ±1Ω value marked on the diagram or the resistor, if not, it should
be replaced.
W (White) Y (Yellow)
∞
∞
∞ 5 ~ 100KΩ
Normal condition
Battery voltage value
Conductive
Generally is 0.1 ~0.8 Ω
Generally is 0.2 ~ 2.0Ω
R (Red)
∞ 3 ~ 100KΩ
∞
61
G (Green)
∞
∞ 5 ~ 100KΩ
∞
∞