Drive Belt Pulley Installation - Carter Talon 150 FX Series Service Manual

• Measure the inner diameter of the movable drive plate.
Service Limit
24.06mm
• Inspect if there is any abrasion or damage of the drive plate hub.
• Measure the outer diameter of the drive plate hubs movable sur-
face.
Service Limit
23.94mm

DRIVE BELT PULLEY INSTALLATION

• Apply some grease evenly in the movable drive plate.
• Put the centrifugal rollers into the movable drive plate.
• Install the ramp plate.
• Put the drive plate hub into the drive plate.
• Install the movable drive plate on the crankshaft.
45