• Supply the oil with the prescribed specification and oil level.
• Mount the level bolt.
• After replacing the oil, inspect for any oil leaks.
TRANSMISSION CASE
TRANSMISSION CASE REMOVAL
• Remove the driven belt pulley.
• Drain out the oil in the transmission case.
• Remove the drive sprocket.
• Remove the bolt, and remove the transmission case cover.
• Remove the gasket and the dowel pin.
• Remove the final gear, the final gear shaft, and remove the
sub shaft/sub shaft gear.
TRANSMISSION CASE GEAR INSPECTION
• Check if the sub shaft/sub shaft gear is damaged or worn.
• Check if the final gear or the final gear shaft is damaged or worn.
52