Driven Belt Pulley; Driven Belt Pulley Removal; Driven Belt Pulley Inspection - Carter Talon 150 FX Series Service Manual

DRIVEN BELT PULLEY REMOVAL

• After removing the clutch friction plate, remove the guide pin,
the roller and the movable driven plate.
• Remove the oil seal on the movable driven plate.

DRIVEN BELT PULLEY INSPECTION

• Measure the free length of the driven belt pulley spring.
Service Limit
• Inspect if there is any abrasion or damage on the driven plate.
• Measure the outer diameter of the driven plate pulley hub.
Service Limit
• Inspect of there is any abrasion or damage of the movable driven
plate.
Service Limit
• Inspect if the groove of the guide pin is worn.

DRIVEN BELT PULLEY

163.7mm
33.94mm
34.06mm
48