Transferring Style Starting Mechanism Installation - Carter Talon 150 FX Series Service Manual

TRANSFERRING STYLE STARTING MECHANISM INSTALLATION

Install according to the pictures.
• Assemble the starting idle shaft set. Before assembling, apply a
little grease on the bore of the idle shaft.
• Assemble the starting spindle, the return spring and the spring
holding pin. A little grease should be applied on the part under
stress of the starting spindle.
• Align the idle shaft holding pin with the groove of the crankcase,
then insert.
Before installing, apply a little grease on the groove
of the rotary retaining spring on the idle shaft.
The rotary retaining spring should be aligned with
the specific groove of the crankcase to install.
• Align the scribing mark of the starting spindle with the punching
mark of the idle shaft, and then mount the starting spindle.
• Hook on the two ends of the return spring.
• Install the return spring stopping plate.
• Install the crankcase dowel pin and gasket.
• Install the driven belt and the driving plate.
• Install the left crankcase cover and lock tightly.
• Install the starting pedal.
35