PRIMARY COIL INSPECTION
When the inspection work is done on the engine there is no need to remove the generator.
• Remove the 4- core connector of the generator.
• Measure the resistance value between the white wires of the generator and connecting wire of
the vehicle body.
When the actual value is more than the standard value, the coil should be replaced.
GENERATOR REMOVAL AND INSPECTION
GENERATOR REMOVAL
• Remove the cooling fan cover bolt and screw.
• Remove the cooling fan cover.
• Remove the cooling fan bolt, and remove the cooling fan.
• Hold the flywheel with a universal holding wrench, at the same
time remove the flywheel nut.
• Remove the flywheel with a flywheel puller, and remove the
solid key.
Standard value
0.2 ~ 0.4 Ω (20°C)
59