Battery Charging; Primary Coil - Carter Talon 150 FX Series Service Manual

Table of Contents

Advertisement

BATTERY CHARGING

• Lift the battery out of the vehicle.
• Connect the positive pole of the charger with the positive pole of the battery.
• Connect the negative pole of the charger with the negative pole of the battery.
• Charge the battery for the charging time marked on the battery.
Unless it is urgent, do not use fast charging. There should be no smoking or open fire
near the battery when charging. At the beginning or the end of charging, turn off the
charger first, in order to avoid the connecting part arcing.
Measure the voltage 30 minutes after charging is finished, and it should reach the specified value,
or it's needed to recharge.
Charging Current
Charging Time
Charging Result
The picture shows the structure of a common generator.
1. Cooling
2. Generator assembly
3. Flywheel comp.
4. Stator comp.
5. Washer
Normal
Fast
Normal
Fast

PRIMARY COIL

6. Bolt
7. Nut
8. Bolt
9. Bolt
58
0.7 A
3.0 A
5-10 hours
30 minutes
Open-circuit voltage ≥ 12.8V

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Carter Talon 150 FX Series

This manual is also suitable for:

Talon 150 gx seriesTalon 150 dlx series

Table of Contents