Transmission Components Inspection And Servicing; Starting Mechanism Inspection And Servicing; Kick Return Starting Mechanism; Spiral Spine Transferring Style Staring Mechanism Removal - Carter Talon 150 FX Series Service Manual

TRANSMISSION COMPONENTS INSPECTION AND SERVICING

STARTING MECHANISM INSPECTION AND SERVICING

The starting mechanism can be divided into two types: kick starting and electric starting.

KICK RETURN STARTING MECHANISM

SPIRAL SPLINE TRANSFERRING STYLE STARTING MECHANISM
The picture shows the structure of the spiral spline transferring style starting mechanism.
1. Kick starter spring stopping plate
2. Drive face
3. Drive face boss
4. Movable drive face comp.
5. Weight roller set
7. Ramp plate
8. Slide piece
9. Starting driven pulley
10. Starter gear friction spring
11. Starter idle gear comp.
12. Starter idle shaft
13. Starter idle spring
14. Kick starter spindle comp.

SPIRAL SPINE TRANSFERRING STYLE STARING MECHANISM REMOVAL

• Remove the left crankcase cover.
• Remove the crankcase gasket, dowel pins.
• Remove the movable driving plate (the whole set).
• Remove the starting spindle washer.
15.Bush
16. Spindle bush
17. Kick starter spring
18. Special pin
20. Washer
21. Washer
22. Washer
25. Nut
26. Bolt
27. Roller
28. Face drive collar
29. Clip
33