• Mount the right crankcase cover positioning bolt.
• Mount the trigger winding and the stator coil.
• Tighten the right crankcase cover positioning bolt.
The bolt should be gradually diagonally tightened in
two to three steps. After finishing the installation, in-
spect for any oil leaks.
FUEL SUPPLY SYSTEM INSPECTION AND SERVICING
CV CARBURETOR
The CV carburetor is a constant vacuum carburetor. The picture shows the structure of the CV
carburetor.
1. Gasket set
2. Float valve set
3. Needle jet set
4. Float set
9. Starter valve set
10. Air cut valve set
11. Compression coil spring
12. Screw
13. Carburetor assy.
14. Top comp.
15. Vacuum piston comp.
16. Needle jet holder
17. Plate clip
18. Holder cap
19. Tube A
5. Float chamber set
6. Screw set A
7. Screw set B
8. Valve plate set
20. Tube B
21. Screw
22. Screw
23. Washer screw
24. Washer screw
25. Washer screw
26. Clip
27. Clip
28. Tube
29. Main jet
30. Slow jet
28