General Information; Model Identification; Fuel And Oil Recommendations; Break-In Procedure - Carter Talon 150 FX Series Service Manual

MODEL IDENTIFICATION

FRAME NUMBER
The frame number or VIN is stamped under the seat on the frame cross member and on a sticker
behind the seat.
ENGINE NUMBER
The engine number is located on the lower front left side of the engine case.

FUEL AND OIL RECOMMENDATIONS

Be sure to use the specified fuel and oil.
FUEL
Gasoline should be 85 to 95 octane or higher.
Unleaded gasoline is recommended.
ENGINE OIL
A high-grade 10W-40 motor oil should be used.

BREAK-IN PROCEDURE

• For the first 2hours of riding, do not exceed 2/3 throttle.
• Vary engine speed for the first 5 hours.
• Never hold engine at full throttle for long periods of time.

GENERAL INFORMATION

1