Oil Pump Assembling; Oil Pump Installation - Carter Talon 150 FX Series Service Manual

OIL PUMP ASSEMBLING

• Assemble the inner and outer rotators of the pump, and mount
the oil pump shaft.
When assembling, align the unfilled corner of the oil pump shaft
with the corner of the inner rotator, and then mount.
• Mount the dowel pin - you can install it after aligning the oil
pump plate with the dowel pin.
• Tighten the oil pump plate bolts.
• After assembling, gently turn the oil pump shaft, and make
sure the oil pump can turn smoothly.

OIL PUMP INSTALLATION

• Install the oil pump on the crankcase.
Before installing, fill the oil pump with oil. When
installing, the arrow of the oil pump body must be
pointing upwards.
• Tighten the oil pump positioning bolts.
• Align the oil pump driving gear with the oil pump shafts unfilled
corner, then mount the driving gear and chain.
• Mount the driving gear-positioning nut and tighten it.
• Install the partition board and tighten bolts.
• Install the starting reduction gear and starting clutch.
• Mount the gasket and dowel pins.
27