Parameters For Analog Electronic Modules 2Ai U High Speed, 2Ai I 2Wire High Speed And 2Ai I 4Wire High Speed - Siemens Simantic ET 200S Manual

Analog electronic modules
4.5 Parameters for analog electronic modules
4.5.3 Parameters for analog electronic modules 2AI U High Speed, 2AI I 2WIRE High
Speed and 2AI I 4WIRE High Speed
Table 4-32 Parameters for analog input modules U, I High Speed
2AI U High Speed 2AI I 2WIRE High
Group diagnosis (parameter assignment error, internal
error)
Diagnostics: Overflow/underflow
--- Diagnostics: Wire
break
Smoothing
Type/range of ---
measurement
--- Type/range of
measurement
--- ---
Note
If you deactivate a channel of the HIGH SPEED modules, you do not achieve any speed
advantage on account of the measuring procedure used.
See also
Connecting Thermocouples (Page 4-18)
4-28
2AI I 4WIRE High
Speed Speed
Diagnostics: Wire
break
---
---
Type/range of
measurement
Range of values
disable
• disable
Enable
•
disable
• disable
Enable
•
disable
• disable
Enable
•
None
• None
Weak
•
Medium
•
Strong
•
De-activated
• ± 10 V
± 10 V
•
± 5 V
•
± 2.5 V
•
Up to 5 V
•
De-activated
• 4 to 20 mA
4 to 20 mA
•
0 to 20 mA
•
De-activated
• 4 to 20 mA
4 to 20 mA
•
0 to 20 mA
•
± 20 mA
•
Manual, Edition 10/2005, A5E00514527-01
Default setting Applicability
Module
Module
Channel
Channel
Channel
Channel
Channel
ET 200S