Finding The Correct Power Module For An I/O Device - Siemens Simantic ET 200S Manual

Power modules

2.8 Finding the correct power module for an I/O device

Terminal module
TM-PF30S47-F1
2.8 Finding the correct power module for an I/O device
2.8
Applicability of power modules
The following table describes which power modules you can use with the different I/O
modules:
Power modules
PM-E 24 VDC
PM-E 24 VDC to 48 VDC
PM-E 24 VDC to
48 VDC/24 VAC to 230 VAC
PM-E F pm 24 VDC
PROFIsafe
PM-E F pp 24 VDC
PROFIsafe
PM-E F 24 VDC PROFIsafe
PM-D
PM-D F
2-16
Can be used with all electronic modules except the 120 VAC Standard, 2DI 230 VAC
Standard, and 2DO 120/230 VAC.
Applicable
Can be used with all electronic modules except the 2DI 120 VAC Standard, 2DI 230 VAC
•
Standard, and 2DO 120 VAC/230 VAC.
For UC electronic modules if the maximum load voltage is 24 VDC and AC is not
•
required
Can be used with all electronic modules.
For the fail-safe modules.
ET 200S Distributed I/O System Fail-Safe Modules
See the
For motor starters and frequency converters.
ET 200S Motor Starter
See
instructions
For fail-safe applications with motor starter or frequency converter.
ET 200S Motor Starter
See
instructions
Design
I/O modules
ET 200S FC Frequency Converter
manual
ET 200S FC Frequency Converter
manual
manual
operating
operating
Manual, Edition 10/2005, A5E00514527-01
ET 200S