Te-U120S4X10 And Te-U120C4X10 Supplementary Terminal (6Es7193-4Flx0-0Aa0); Table 1-1 Potential Groups On The Supplementary Terminal - Siemens Simantic ET 200S Manual

1.14 TE-U120S4x10 and TE-U120C4x10 supplementary terminal (6ES7193-4FLx0-0AA0)

1.14 TE-U120S4x10 and TE-U120C4x10 supplementary terminal
1.14
(6ES7193-4FLx0-0AA0)
Properties
• 40-pin extension for
• available in two variants: screw terminal, spring terminal
• Any additionally required potentials can be applied to the supplementary terminal, e.g.
• The four potential groups on the supplementary terminal can be adapted (extended) for
Extending the potential groups
The supplementary terminal is fitted with three pluggable bridges on delivery.
If it is necessary to apply more than one potential to the supplementary terminal, the
potential groups on the supplementary terminal can be extended. This is done with
pluggable bridges that connect two or more groups. After removal of corresponding bridges
terminals are available for additional potentials.
Table 1-1
inserted
bridges
ET 200S
Manual, Edition 10/2005, A5E00514527-01
– the TM-C terminal module for COMPACT modules
– any terminal modules with a width of 120 mm
with 3 or 4-wire connection of sensors or actuators.
the local requirements with pluggable bridges.
Potential groups on the supplementary terminal
Quantity
Potential
groups
3 1
1
2 2
Position on the supplementary terminal
Terminal modules
1-19