2Ai I 2Wire High Speed Analog Electronic Module (6Es7134-4Gb51-0Ab0) - Siemens Simantic ET 200S Manual

4.11 2AI I 2WIRE High Speed analog electronic module
4.11
(6ES7134-4GB51-0AB0)
Properties
• 2 inputs for measuring current
• Current-limited sensor supply (90 mA)
• Input ranges:
• Supports isochronous operation
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal assignment for 2AI I 2WIRE High Speed (6ES7134-4GB51-0AB0)
Terminal Assignment Terminal
1 M
0+
2 M
0-
3 M
ana
4 n.c.
A4 AUX1
A3 AUX1
ET 200S
Manual, Edition 10/2005, A5E00514527-01

4.11 2AI I 2WIRE High Speed analog electronic module (6ES7134-4GB51-0AB0)

4 to 20 mA, resolution 13 bits
0 to 20 mA, resolution 13 bits
– Minimum time for the synchronous DP cycle (T
– Minimum conversion time of the input modules (T
Assignment
5 M
1+
6 M
1-
7 M
ana
8 n.c.
A8 AUX1
A7 AUX1
M : Input signal "+", channel n
•
n+
M : Input signal "-", channel n
•
n-
M : Ground (of power module)
•
ana
n.c.: Not connected (max. DC 30 V can be connected)
•
AUX1: Protective-conductor terminal or potential bus (freely usable
•
up to 230 VAC)
Analog electronic modules
): 2.5 ms
DPmin
): 1.1 ms
WEmin
Notes
4-57