Sirius 800 Series User Manual
Connector Location Example:
Locating video input channel 35.
Note:
Catsii Color Configuration
This screen shows the Catsii colors used on your system. Touch the Catsii Colours button on
the Catsii Control screen (see Figure 39).
The Catsii colors can be changed from Workbench, see section 6.3 for details.
Iss 5 Rev 7
1.
If there is already a number entered in the left Dial-Up keypad touch the Clear button
on left Dial-Up keypad to delete it.
2.
Touch button 3 and then button 5 on the left Dial-Up keypad so 35 is displayed.
3.
Touch the Take button on the left Dial-Up keypad.
4.
The connector for channel 35 will be in the centre of the cross hair on the rear of the
router.
5.
Once you have located the connector touch the Clear button on the left Dial-Up
keypad to remove the cross hair.
The Clear button must also be touched before entering a new source or destination.
6.
Touch the Normal button on the left Dial-Up keypad to return the Catsii LEDs to their
previous state.
Figure 41 Catsii Color Configuration
Page 74
Miscellaneous
Door PC 5.6
© 2017 SAM