Sam Sirius 840 User Manual page 152

Sirius 800 Series User Manual
9.19.2.3 Creating an Example Audio Package
To create the following audio package for video source 99:
Note: as these audio channels are not from the crosspoint and are the original embedded
audio channels of video source 99 they are set up from the shuffler, see section 9.19.2.4.
Table 32
Iss 5 Rev 7
5919 Sirius 800 Video AHP Input Module with Delay and Sync
Source supplying crosspoint audio channels
Video Source 2, Audio channels 5, 6, 9 and 10
Video Source 6, Audio channels 1 and 2
Video Source 99, Audio Channels 1 and 2
Example Audio Channel Sources
1. Open the Workbench Input Embedding Routing screen from the Workbench Main
Menu screen.
The Input Embedding Routing screen works in a similar to the Track Routing screen
and allows audio channels from multiple sources to be routed from the audio
crosspoint modules for embedding into the selected AHP video input module port.
Figure 105 Creating a "Package" using the Input Embedding Routing Screen
-
Page 152
Input Rear Panels and Input
Audio channels from Crosspoint
to Video Source 99 Audio Channels
1 to 4 respectively
7 and 8 respectively
5 and 6 respectively
9 to 16
(Source 99 original embedded audio)
© 2017 SAM