Table of Contents
Advertisement
Sirius 800 Series User Manual
LED Color
Blue/Green
Table 34
Iss 5 Rev 7
Label
Detail
Switch
Flashes on a take signal
Yellow
when switching a route
Fugue
CPU status
Status
The LED is approximately
25 mm (1 Inch) from the
edge of the board.
Xpt Alarm
Displays if there is a
problem with any
crosspoints
Red
Active
Route is active on
crosspoint
Yellow
Route Fail
Illuminated if a route failure
Red
has been detected on this
crosspoint
5905 Video Crosspoint Module LED Information (Continued)
5905 Sirius 800 Series Video Crosspoint Module
Page 160
Crosspoint Modules 10.1
Status
Off - normal state
Flashes - each time a route is set
Flashing Green, Green, Blue -
normal operation, the CPU is
programmed and running
Brief Flash Red at startup - normal
Flashing Red - CPU error. Remove
module and refit to force a reboot.
Off - normal state
On solid - problem with one or more
crosspoints on the module.
Flashing - Crosspoint module
overheating, make sure the fan
assemblies are all closed and the fans
are all operating correctly.
Flashing - when this module is routing
one or more signals to live outputs.
Removing the crosspoint module will
disturb the signal(s) passing through
the crosspoint module.
Off - normal state
Flashing - receiving error messages
related to a route failure
© 2017 SAM
Advertisement
Table of Contents
