Sam Sirius 840 User Manual page 228

Sirius 800 Series User Manual
Monitor Outputs and External Multiviewer Outputs:
Each monitor output port must be configured to match the type of signal it will be monitoring
when the router is in use (see Table 55). This configuration is carried out in Workbench, see
the Workbench manual for information.
Discrete MADI or AES Audio
4915, 4929 and 4925 modules
Video
5917, 5919, 5926, 5938, 5949, 5913,
5914, 5915, 5916, 5923, 5924, 5925 and
5937 modules
Table 55
The monitor output ports only output mono signals. If an AES left or right channel is routed to
a monitor output the relevant AES pair will be output as a combined mono signal.
Multiviewer Crosspoint:
A 5902 Multiviewer Crosspoint module is required by the External Multiviewer option and by
the MV-800 Integrated Multiviewer option.
Iss 5 Rev 7
Monitoring and Multiviewer Overview
Signal Type Monitored
Monitor Output Port Configuration
Page 228
Multiviewer & Input/Output Monitoring Modules 13.1
Monitor Output Port Configuration Required
Configure Monitor Output Port to Matrix 2 (Audio)
Configure Monitor Output to Matrix 1 (Video)
Embedded audio is passed with the video signal
© 2017 SAM