Sam Sirius 840 User Manual page 314

Sirius 800 Series User Manual
The 5915 Input Module is compatible with the rear panels listed in Table 96
Sirius 830: 1234 & 1235 BNC rear panel
Sirius 830: 1372 HD BNC rear panel
Sirius 830: 1236 Fiber rear panel
Sirius 830: 1373 Fiber rear panel
Sirius 840/850: 1349/1289 BNC rear panel
Sirius 840/850: 1360 HD BNC rear panel
Sirius 840/850: 1305 Fiber rear panel
Sirius 840/850: 1361 Fiber rear panel
Sirius 840/850: 1362 DS-Link rear panel
Table 96
C.2.2.1 Processing on the Input Module
The 5915 video input module can manipulate the audio channels received from the input rear
panels before outputting them to the video and audio crosspoint modules. This makes it
possible to customize the audio input channels to a house standard within the router.
Note:
Processing is configured in Workbench. Figure 201 shows the order that the processing is
applied to the audio.
If any embedded audio channels are asynchronous to the video signal the input module will
use drop/repeat to synchronize the audio channels with the video signal.
Iss 5 Rev 7
Rear Panel
5915 Rear Panel Compatibility
Processing is a licensed option and must be purchased for each module it is used on (see
section 3.6 for details).
*Input/Output Monitoring selected from either the input or the output of the module (pre or
post processing). See section 5.6.3 for details on how to configure this using the router
Door PC.
Figure 201 Processing Block Diagram
Input Modules Modules No Longer Supplied With New Systems C.2
see section 9.1
see section 9.2
see section 9.3
see section 9.4
see section 9.9
see section 9.10
see section 9.11
see section 9.12
see section 9.13
Page 314
See Section
© 2017 SAM