Multiviewer & Input/Output Monitoring Modules; Monitoring And Multiviewer Overview - Sam Sirius 840 User Manual

Sirius 800 router range
Table of Contents

Advertisement

Sirius 800 Series User Manual
13 Multiviewer & Input/Output Monitoring Modules

13.1 Monitoring and Multiviewer Overview

Monitor Outputs:
The Sirius 800 routers have four independently-selectable SDI monitor outputs. The four SDI
monitor outputs can be selected from any of the video/audio inputs or outputs in the local
router frame.
Monitoring SDI outputs are not available on the Sirius 830 when it is equipped with external
multiviewer SDI outputs.
External Multiviewer SDI Outputs:
Sirius 800 routers can be equipped to provide extra SDI outputs for connecting to external
multiviewers. The extra SDI outputs provide monitoring of any router SDI input. See
Figure 151.
Note:
A multiviewer crosspoint module, used with a external multiviewer output module or an
integrated multiviewer module, does not take any routing capability away from the main
crosspoint matrix. the multiviewer output module takes a copy of each input signal, and sends
out up to 140 (Sirius 850 - up to 96) outputs to HD BNC connectors.
Iss 5 Rev 7
Monitoring and Multiviewer Overview
The monitor and multiviewer do not have any redundancy.
Sirius 830: Input/Output Monitoring is not available on the Sirius 830 when it is
equipped with multiviewer outputs.
Sirius 840/850: If Input pre-processing is monitored using the monitor outputs then
multiviewer outputs should not be routed from inputs 1, 3, 5 and 7 of any video
input module as they will display duplicates of the four monitoring outputs.
Inputs from Input Modules
5902: Multi-viewer Crosspoint Module
5931: External Multiviewer Output Modules
Sirius 830/840: up to 3 x 1369 rear panels - 140 Signals
Sirius 850: up to 2 x 1370 rear panels - 96 Signals
Figure 151 Monitoring and External Multiviewer SDI Outputs
Multiviewer & Input/Output Monitoring Modules 13.1
Page 226
Sirius 840/850 only:
Four SDI signals to
the 5933 output
monitoring module
and then to the BNC
connectors on the
control panel rear
(see section 16.2)
HD BNC Connectors.
SDI outputs
to external multiviewer(s)
© 2017 SAM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sirius 850Sirius 830

Table of Contents