Implement Limitations - Kubota L3540 Operator's Manual

12

IMPLEMENT LIMITATIONS

IMPLEMENT LIMITATIONS
The KUBOTA Tractor has been thoroughly tested for proper performance with implements sold or approved by KUBOTA.
Use with implements which are not sold or approved by KUBOTA and which exceed the maximum specifications listed
below, or which are otherwise unfit for use with the KUBOTA Tractor may result in malfunctions or failures of the tractor,
damage to other property and injury to the operator or others. [Any malfunctions or failures of the tractor resulting from use
with improper implements are not covered by the warranty.]
B Front Loader
Fixation points on the body of the tractor where the
front loader must be installed.
Install the front loader frame to the clutch housing and the
front axle frame as shown.
[LA514EC] [LA714EC]
(1) Support RH
2-M16 x 50 bolts (RH) 2-M16 x 55 bolts (RH)
2-M16 x 40 bolts (LH) 2-M16 x 45 bolts (LH)
4-M16 spring lock 4-M16 spring lock washers
(2)
washers 4-5/8 hardened plain washers
4-5/8 hardened plain
washers
4-M16 x 40 bolts 4-M16 x 45 bolts
4-M16 spring lock 4-M16 spring lock washers
(3) washers 4-5/8 hardened plain washers
4-5/8 hardened plain
washers
8-M16 x 40 bolts 8-M16 x 45
8-M16 spring lock bolts
(4)
washers 8-M16 spring
lock washers
(5) Spacer
Tightening torque: 226 N-m (23 kgf-m)
[LA854EC]
10-M16 x 45
bolts
10-M16 spring
lock washers