Table of Contents
Advertisement
30
OPERATING THE TRACTOR
BTurn Signal Light Switch
To indicate a right turn, turn the switch clockwise.
To indicate a left turn, turn the switch counter-clockwise.
When the left or right turn signal is activated in
combination with the hazard lights, the indicated turning
light will flash and the other will stay on.
A Be sure to return switch to center position after turning.
(1) Hazard light switch
(2) Head light switch
(3) Turn signal light switch
3. Checking the Brake Pedal.
BBrake Pedal
Make sure to latch the brake pedal with the parking brake
lock pedal. Use both right and left feet for the procedure.
To avoid personal injury:
A An accident may occur if the tractor is
suddenly braked, such as by heavy towed
loads shifting forward or loss of control.
A The
braking
characteristics
between two and four wheel drive. Be aware of
the difference and use carefully.
A When driving on icy, wet or loose surfaces,
make sure the tractor is correctly ballasted to
avoid skidding and loss of steering control.
Operate at reduced speed.
(A) "ON"
(B) "OFF"
(C) "RIGHT TURN"
(D) "LEFT TURN"
are
different
(1) Brake pedal
(2) Parking brake lock pedal
4. Raise the Implement.
(see "HYDRAULIC UNIT" section.)
Move the hydraulic control lever rearward.
(1) Hydraulic control lever
5. Selecting the Travel Speed.
(A) "DEPRESS"
(B) "PUSH FORWARD
WHILE DEPRESSING (1)"
"RAISED"
(N) "NEUTRAL POSITION"
"LOWERED"
Advertisement
Table of Contents
