B.1 Overview; Product Certifications; B.2.1 Approved Manufacturing Locations; Flameproof Enclosure Ex D Protection Type In Accordance With Iec - Emerson Rosemount 8800D Series Reference Manual

Product Certifications

May 2016
Appendix B
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 141
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 141
European Directive Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 141
ATEX Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 141
European Pressure Equipment Directive (PED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 141
Hazardous Location Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 142

B.1 Overview

This appendix contains information on approved
manufacturing locations, European directive information,
Hazardous Locations Certifications, field circuit
configuration drawings, and CSA Intrinsic Safety approval
drawings.
B.2 Product certifications

B.2.1 Approved Manufacturing Locations

Emerson Process Management—Eden Prairie, Minnesota,
USA
Emerson Process Management BV - Ede, The Netherlands
Emerson Process Management Flow Technologies Co., Ltd -
Nanjing, Jiangsu Province, P.R. China
SC Emerson SRL - Cluj, Romania
B.2.2 Flameproof enclosure Ex d protection
type in accordance with IEC 60079-1,
EN 60079-1
Transmitters with Flameproof enclosure type protection

shall only be opened when power is removed.
Closing of entries in the device must be carried out using

the appropriate Ex d cable gland or blanking plug. Unless
otherwise marked on housing, the standard conduit
entry thread forms are 1/2-14 NPT.
B.2.3 Type n protection type in accordance
with IEC 60079-15, EN60079-15
Closing of entries in the device must be carried out using
the appropriate Ex e or Ex n cable gland and metal blanking
plug or any appropriate ATEX or IECEx approved cable gland
and blanking plug with IP66 rating certified by an EU
approved certification body.
Product Certifications
Product Certifications

B.3 European Directive Information

The CE Declaration of Conformity for all applicable
European directives for this product can be found on our
website at EmersonProcess.com/Rosemount. A hard copy
may be obtained by contacting our local sales office.

B.4 ATEX Directive

Emerson Process Management complies with the ATEX
Directive.
B.5 European Pressure Equipment
Directive (PED)
Rosemount 8800D Vortex Flowmeter Line Size 40 mm to
300 mm
Certificate Number 4741-2014-CE-HOU-DNV
0575
Module H Conformity Assessment
Mandatory CE-marking for flowmeters in accordance with
Article 15 of the PED can be found on the flowtube body.
Flowmeter categories I – III use module H for conformity
assessment procedures.
Rosemount 8800D Vortex Flowmeter Line Size 15 mm
and 25 mm
Sound Engineering Practice (SEP)
Flowmeters that are SEP are outside the scope of PED and
cannot be marked for compliance with PED.
Reference Manual
00809-0100-4004, Rev DC
141