Turntable Rotation Components; Rotation Hydraulic Motor - Genie S-80 Service Manual

Section 7 - Repair Procedures

Turntable Rotation Components

12-1

Rotation Hydraulic Motor

How to Remove the Rotation
Hydraulic Motor
1 Secure the turntable from rotating with the
turntable rotation lock pin.
Unlocked position
Locked position
7 - 42
2 Tag and disconnect the hydraulic hoses from
the motor and manifold, and plug them.
3 Remove the motor mounting bolts, then
remove the motor from the brake.
f
How to Remove the Turntable
Rotation Brake or Torque Hub
Refer to Maintenance Procedures, C-6, How to
Replace the Torque Hub Oil.
Genie S-80 & Genie S-85
Service Manual - First Edition
Bodily injury hazard.
Spraying hydraulic oil can
penetrate and burn skin. Loosen
hydraulic connections very slowly
to allow the oil pressure to
dissipate gradually. Do not
allow oil to squirt or spray.
a b
e
a motor/brake mounting bolts
b motor
c brake
d torque hub mounting bolts
e torque hub
f plug
Part No. 34032
c
d