Genie S-80 Service Manual page 24

Section 3 - Scheduled Maintenance Inspections
MAINTENANCE TABLES
Table B, continued
B-13 Test the Key Switch
B-14 Test the Emergency Stop Buttons
B-15 Test the Ground Control Override
B-16 Test the Platform Self-leveling
B-17 Test the Service Horn
B-18 Test the Foot Switch
B-19 Test the Engine Idle Select
B-20 Test the Fuel Select Operation -
Gasoline/LPG Models
B-21 Test the Drive Enable System
B-22 Test the Drive Brakes
B-23 Test the Drive Speed -
Stowed Position
B-24 Test the Alarm Package -
Optional Equipment
B-25 Perform Hydraulic Oil Anaysis
See D-1 Test or Replace the Hydraulic Oil
B-26 Check the Hydraulic Limit Switch Linkage
Every 500 hours, perform the following engine
maintenance procedure.
B-27 Replace the Engine Oil and Filter -
Deutz Diesel Models
3 - 4
Tools are
required
Genie S-80 & Genie S-85
Service Manual - First Edition
Warm
New parts engine
required required
Cold Dealer
engine service
required suggested
Part No. 34032