Turntable Rotation Components; Turntable Rotation Motor - Genie TMZ-34/19 Service Manual

June 2005
800-610-4101
ActionRental.com
REV B
8-1

Turntable Rotation Motor

How to Remove the Turntable
Rotation Motor
When removing a hose assembly
or fitting, the O-ring on the fitting
and/or hose end must be replaced
and then torqued to specification
during installation. Refer to
Section 2, Hydraulic Hose and
Fitting Torque Specifications.
1 Secure the turntable from rotating by securing
the primary boom to the trailer tongue with the
hold-down latches.
2 Remove the turntable rotation manifold
mounting fasteners securing the manifold to the
motor.
3 Remove the turntable rotation motor gear
mounting fastener from under the turntable and
remove the turntable rotation motor gear.
4 Remove the turntable rotation motor mounting
fasteners and remove the turntable rotation
motor from the machine.
Part No. 52075

Turntable Rotation Components

TMZ-34/19
Section 4 • Repair Procedures
4 - 45