Genie S-80 Service Manual page 25

Service Manual - First Edition
Table C
C-1 Check the Boom Wear Pads
C-2 Check the Extnedable Axle Wear Pads
C-3 Check the Turntable Rotation Bearing Bolts
C-4 Check the Free-wheel Configuration
C-5 Grease the Turntable Rotation Bearing
and Rotate Gear
C-6 Replace the Torque Hub Oil
C-7 Replace the Hydraulic Tank Filter
C-8 Replace the Drive Loop Hydraulic Filter
C-9 Replace the Diesel Fuel Filter -
Deutz Diesel Models
C-10 Replace the Gasoline Fuel Filter -
Gasoline/LPG Models
C-11 Replace the PCV Valve -
Gasoline/LPG Models
C-12 Clean or Replace the Distributor Cap
and Rotor - Gasoline/LPG Models
C-13 Replace the Spark Plugs -
Gasoline/LPG Models
C-14 Check and Adjust the Air/LPG Mixture -
Gasoline/LPG Models
C-15 Check and Adjust the Ignition Timing -
Gasoline/LPG Models
C-16 Check the Engine Valve Clearances -
Deutz Diesel Models
C-17 Adjust the Turntable Backlash
Part No. 34032
Section 3 - Scheduled Maintenance Inspections
Tools are
required
Genie S-80 & Genie S-85
MAINTENANCE TABLES
Warm
New parts engine
required required
Cold Dealer
engine service
required suggested
3 - 5