4.1.2 FoUSB starts
1) From the Start menu, choose Programs -- RENESAS-TOOLS – Flash-over-USB
V.*.** -- FoUSB Programmer to start the FoUSB. When the FoUSB starts, the
FoUSB main window shown in Figure 4-4 appears.
ii) Update button
2) Guide to understanding the display of the main screen
No.
i
Main button 1
ii
Update button
iii
MCU select button
iv
Monitor information
v
Detail button
vi
Main button 2
i) Main button 1
Figure 4-4 FoUSB main window
Item
Use these main buttons to download a program as well as
read, erase or write to the flash memory.
Click this button to upgrade the FoUSB version.
Use this button to select the Target MCU.
Shows information on the selected MCU.
Shows detailed information on the downloaded program.
Use these main buttons to set functions, show help or exit.
iii) MCU select button
iv) Monitor information
Content
30
4 Using the FoUSB
v) Detail button
vi) Main button 2