Renesas M16C FAMILY User Manual page 55

(a) At first an example to which the Emulation Memory overlaps the User Program is
shown. In this example, the User Program is allocated from F00000h and the
Emulation Memory is allocated from F00000h (using default value F0 of bank
address). Therefore, the Emulation Memory overlaps the User Program and contes
of the User program and asseble codes are not matched.
Bank Address
F00000h
Emulation Memory
F10000h
FFF900h
FFFEFFh
Fixed Vector Table
FFFFFFh
64KB
User Area
Monitor Area
The user program code (NOP) and
asseble code (BRK) are not matched.
52
The Emulation Memory overlaps
the user program.
5 Using the KD